CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
User’s Manual U16348EJ1V0UM
17
2.2
Connection
The following describes the connection between the IE-70000-MC-NW-A and related devices.
(1) Connection to the interface board
Use the host interface cable (supplied) to connect the host interface connector of the IE-70000-MC-NW-A to
the “CH0” connector
Note
of the interface board.
When connecting the interface board to the IE-70000-CD-IF-A, use the cable supplied with the IE-70000-CD-
IF-A (sold separately).
Note
IE-70000-PCI-IF-A (sold separately), IE-70000-PC-IF-C (sold separately), or IE-70000-98-IF-C (sold
separately)
(2) Connection to the target system
Use the IE connection cable (supplied) to connect the IE connector of the IE-70000-MC-NW-A to the IE
connector
Note
on the target system.
Note
IE connector (recommended)
8830E-026-170S (manufactured by KEL corporation): 26-pin straight type
8830E-026-170L (manufactured by KEL corporation): 26-pin right-angle type
Figure 2-2. Connection to Target System
Target system
IE-70000-MC-NW-A
IE connector
IE connection cable (approximately 300 mm)
IE connector
(to be prepared by user)
