NEC IE-178054-NS-EM1 User Manual Download Page 6

Page: 6 / 43

User’s Manual U16043EJ2V0UM

INTRODUCTION

Product Overview

The IE-178054-NS-EM1 is designed to be used with the IE-78K0-NS or IE-78K0-NS-A to

debug the following target devices that belong to the 178K Series of 8-bit single-chip

microcontrollers.

•

PD178054 Subseries:

PD178053, 178054, 178F054

Target Readers

This manual is intended for engineers who will use the IE-178054-NS-EM1 with the IE-

78K0-NS or IE-78K0-NS-A to perform system debugging.

Engineers who use this manual are expected to be thoroughly familiar with the target

device’s functions and use methods and to be knowledgeable about debugging.

Organization

When using the IE-178054-NS-EM1, refer to not only this manual (supplied with the IE-

178054-NS-EM1) but also the manual that is supplied with the IE-78K0-NS or IE-78K0-

NS-A.

The IE-78K0-NS used in combination with the IE-78K0-NS-PA is functionally equivalent

to the IE-78K0-NS-A. As necessary therefore, read IE-78K0-NS + IE-78K0-NS-PA for IE-

78K0-NS-A in this document.

IE-78K0-NS or IE-78K0-NS-A

IE-178054-NS-EM1

User’s Manual

•

Basic specifications

•

General

•

System configuration

•

Part names

•

External interface functions

•

Installation

•

Differences between target devices

and target interface circuits

Purpose

This manual is intended to give users an understanding of the various debugging

functions that can be performed when using the IE-178054-NS-EM1.

Summary of Contents for IE-178054-NS-EM1












































Search results

Summary of Contents for IE-178054-NS-EM1

Reviews:

Related manuals for IE-178054-NS-EM1

Brands by name

Popular brands

NEC IE-178054-NS-EM1, User Manual

Search results

Summary of Contents for IE-178054-NS-EM1

Reviews:

Related manuals for IE-178054-NS-EM1

Brands by name

Popular brands