background image

Rear Projection Setup 

The following diagram shows the relationship between projector position and the screen. Refer to the chart below for data. 
Distances are in inches. For millimeters multiply by 25.4. 
 

Screen Ctr

Throw Distance

5.3"

C

Throw Angle 0°/No Offset

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note:

 Lens shift is not available on the GT10RLB rear lens. The GT6000R should be used only for “zero degree/no-offset” rear 

projection applications. 

 

Note

:

 

Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%. 

 
 

Distance Chart 

(for popular 4:3 screen sizes)

 

 
 

Throw Distance

Rear Lens

GT10RLB

Diagonal Width(H) Height (V)

1.0:1

inches

inches

inches

inches

40

32

24

30.0

60

48

36

46.1

67

53.6

40.2

51.7

72

57.6

43.2

55.7

80

64

48

62.1

84

67.2

50.4

65.3

90

72

54

70.2

100

80

60

78.2

120

96

72

94.2

150

120

90

118.3

180

144

108

142.4

210

168

126

166.5

240

192

144

190.6

250

200

150

198.6

Screen Size

 (4:3)

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note: 

For screen sizes not indicated on the projection chart, use the formulas on page 1. 

 
 
 
 
 
 

www.necvisualsystems.com 

 

GT6000R 

Page 2 of 5 

Summary of Contents for GT6000R - SXGA+ LCD Projector






Reviews: