DECT G966 Handset Basic User Guide
© NEC Nederland B.V. 2014
All right are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. All brand names and
product names in this document are trademarks or registered trademarks of their respective companies.
18|
160 hours of standby time.
When the battery is nearly discharged a warning beep sounds and, when not in a call, the display
shows a battery low indication.
You cannot make calls while this message is displayed.
2.7 Turning the G966 on/off
To turn on the G966:
1.
Press and hold the
LOCK/PWR
key for a few seconds.
2.
Unlock the screen with your finger.
To turn off the G966:
1.
Press and hold the
LOCK/PWR
key.
2.
Tap
OK
. The screen will turn off in a few seconds.
2.8 Unlocking/locking screen
The screen is locked by default when you turn on power. To unlock the screen,
1.
Press the
LOCK/PWR
key.
2.
Drag the inner ring to the edge of the circle to unlock the screen. Draw a pattern if the
screen is protected by pattern lock. Enter a PIN or a password if the screen is locked by a PIN
or a password.
3.
For more information on screen lock, refer to the Security section (section 6.12).
➠
