NEC Express5800/T120e Maintenance Guidance Download Page 114

Page: 114 / 149

9. Universal RAID Utility

Express5800/T120e Maintenance Guide

114

Chapter 2 Useful Features

Universal RAID Utility

Universal RAID Utility is an application to manage or monitor the following RAID controllers.



Onboard RAID Controller (LSI Embedded MegaRAID)



N8103-172 RAID Controller (512 MB, RAID 0/1)



N8103-173 RAID Controller (512 MB, RAID 0/1/5/6)



N8103-174 RAID Controller (1GB, RAID 0/1/5/6)



N8103-168 RAID Controller (1GB, RAID 0/1/5/6)

See "

Installation Guide (Windows)

" for installation.

See "

Universal RAID Utility User’s Guide

" in EXPRESSBUILDER for more information.

9.1

Easy Configuration Feature

Easy Configuration cannot be used with LSI Embedded MegaRAID.

9.2

Creating Logical Drive of RAID 6

Four or more physical devices are needed to create a RAID 6 logical drive by using Universal RAID Utility.
If you want to create a RAID 6 logical drive from three physical devices, use WebBIOS.

Summary of Contents for Express5800/T120e






















































































































































Search results

Summary of Contents for Express5800/T120e

Reviews:

Brands by name

Popular brands

NEC Express5800/T120e, Maintenance Guidance

Search results

Summary of Contents for Express5800/T120e

Reviews:

Brands by name

Popular brands