4-34 Configuring Your Server
Operating Procedures for Configuration Utility
Creating/Adding Configuration
Run LSI Software RAID Configuration Utility
Set new configuration information (pack/virtual drive settings)
Check the virtual drive settings
Initialize virtual drive
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
1.
Run LSI Software RAID Configuration Utility.
Select "Configure"
→
"New Configuration" from the TOP menu (Management Menu).
Select "View/add Configuration" to add configuration.
IMPORTANT:
Creating a configuration using "New Configuration" menu clears
the existing configuration information. To add configuration
information to the existing configuration, select "View/add
Configuration."
You cannot create Spanning of RAID1 or set the virtual drive
capacity on "Easy Configuration" menu.
Use "New Configuration" or "View/Add Configuration" instead.
