NEC Express5800/120Mc2 series, Release Note

Page: 7 / 8

Express5800/120Mc2 System Release Notes 5
System Hardware
The following advisory applies to the Plug and Play feature of your server's I/O
expansion boards.
!
The Windows 2000 Operating System requires that your server’s PnP O/S
feature be enabled. Before installing the Windows 2000 Operating System,
run the BIOS Setup Utility as described in Chapter 3 of your User’s Guide,
to verify the PnP O/S feature is enabled. Your User’s Guide is included on
ExpressBuilder.
The following advisory applies to the USB ports on your server's external device
connectors.
!
The factory standard default value of the USB ports on your server is
"Disabled". To enable them, the USB Controller feature in the Peripheral
Configuration Submenu of the BIOS Setup Utility "BIOS Setup
Configuration Settings" must be changed to "Enabled". Refer to
Chapter 3 of your User’s Guide. Your User’s Guide is included on
ExpressBuilder.