Express5800/120Mc2 System Release Notes 3
Introduction
These System Release Notes cover the following topics:
!
General Comments
!
Advisories
General Comments
The following general comments apply to this server.
!
Versions of the Network Operating Systems tested and recommended are:
Windows 2000
®
Windows NT
®
4.0 Server with Service Pack 6
Novell® NetWare
®
5.0
IntraNetWare 4.11 with Support Pack 5b
SCO OpenServer
™
5.05 with Maintenance Supplement 505A.
UNIXWare
®
7.1
Advisories
This section contains advisories on the ExpressBuilder, System Element
Monitoring
,
SCO, and the BIOS Setup Utility.
ExpressBuilder
The following advisory applies to ExpressBuilder.
!
If you already have an operating system installed when creating a
maintenance partition, ExpressBuilder will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
!
ExpressBuilder EasySetup will always configure the Windows 2000 TCP/IP
Protocol IP settings to obtain an IP address automatically (DHCP),
regardless of the setting specified in EasySetup.
!
After installation, the Windows 2000 Device Manager may show an NEC
GEM SCSI Processor Device and/or an Unknown Device under Other
Devices. The Unknown Device is referenced on the baseboard management
controller. Both of these conditions can be cleared by installing the
ESMPRO Agent.
!
The ExpressBuilder DOS ASPI driver is not supported.
Summary of Contents for Express5800/120Mc2 series
Page 1: ...System Release Notes Express5800 120Mc2 System Release Notes PN 455 01575 002...
Page 4: ...nec...
Page 8: ......
