6
CHAPTER 2 CONNECTIONS
(1) Connecting IE-75300-R-EM and adapter board
Connect the adapter board to the IE-75300-R-EM.
<1> While placing a spacer between the IE-75300-R-EM and the adapter board, connect the connectors
CN1 to CN4 of the IE-75300-R-EM and the connectors CN1 to CN4 of the adapter board.
<2> Fasten the spacer between the IE-75300-R-EM and the adapter board using the spacer installation
screws.
<3> Switch off the power of the IE-75001-R.
<4> Take off the 6 screws on the top of the IE-75001-R unit, then open the unit’s top cover.
<5> Pull the card pullers on both ends of the board forward and pull out the IE-75000-R-BK
Note
.
<6> Screw the IE-75300-R-EM to the IE-75000-R-BK together.
<7> Replace the IE-75000-R-BK screwed together with the IE-75300-R-EM to the original position of
the IE-75001-R.
Note
In the case of the IE-75000-R, the IE-75000-R-EM and the IE-75000-R-BK are installed screwed
together. Therefore, pull out the IE-75000-R-BK from the main unit in the above sequence
<3>
→<
4>
→<
5>, remove the screws and pull off the IE-75000-R-EM before following steps
<1>
→<
2>
→<
6>
→<
7>.
Figure 2-1. Connecting IE-75300-R-EM and Adapter Board
CN4
CN1
IE-75300-R-EM
Spacer
Installation Screws
Adapter Board
CN5
Summary of Contents for EP-753304DU-R
Page 7: ...ii MEMO...
