NEC EGW101 User Manual Download Page 74

Page: 74 / 85

NeoFace Access Control User's Guide

Chapter 2 Installation and Connection

Setup

Card Reader Settings

Setting the card reader.

Setting the type of card reader.

- In the case of not using the card reader, select "Not used".

- To use the internal card reader, select "Internal".

- To use an external card reader, select "External".

* When using an external card reader other than Safeware / SecureFrontia, please contact your sales representative as

separate response is required.

* When using the following authentication mode (refer to 5.4.2, Chapter 2 ), do not set card reader type as "Not used".

- Face and card linked authentication (walk-through)

- Face and card authentication

- Card authentication

Select the ID (NFC / FelicaD / FelicaS / QR / SAFEWARE / SECURE_FRONTIA) of the card reader to be used.

Touch the "Next" button after completing the selection and input.

Summary of Contents for EGW101






















































































Search results

Summary of Contents for EGW101

Reviews:

Related manuals for EGW101

Brands by name

Popular brands

NEC EGW101, User Manual

Search results

Summary of Contents for EGW101

Reviews:

Related manuals for EGW101

Brands by name

Popular brands