NEC E651-T, User Manual

Page: 21 / 30

English-19
English
PICTURE
Picture Mode Select [Dynamic], [Cinema], [Custom], or [Standard].
Adjust Contrast, Brightness, Sharpness, Tint, and Color.
Backlight Adjust the Backlight setting.
Color Temperature Adjust Color Temperature and Gain.
Gamma Select a Gamma setting.
Noise Reduction Adjust Noise Reduction.
Adaptive Contrast Select On or Off for Adaptive Contrast.
Over Scan Adjust Over Scan.
Aspect Ratio Adjust Aspect Ratio.
• Select [4:3], [16:9], [Zoom], [Cinema], or [Dot by Dot].
When Over Scan is set to Off, you can select [4:3], [16:9], or [Dot by Dot].
Color Range Adjust Color Range or set Automatic.
VGA setting Adjust H Position, V Position, Clock, and Phase.
Reset Picture Setting Resets the settings in the Picture menu back to their factory settings.
Sound
Sound Mode Select [Standard], [Dynamic], or [Custom].
Adjust Treble, Bass, and Balance.
Surround Sound Select On or Off for Surround Sound.
Speaker Select [Internal] or [External].
Audio Source Select [Line In/HDMI1], [Line In/HDMI2], [Line In/HDMI3], or [Line].
Reset Sound Setting Resets the settings in the Sound menu back to their factory settings.
Setup
Scheduler • Change the schedule setting.
• The schedule function allows the display to be set to power on and off at different times. Up to seven
different schedules can be programmed.
• If schedules are overlapping then the schedule with the highest number will have priority over the
schedule with the lowest number. For example schedule #7 will have priority over schedule #1.
Signal Check Priority • Set [Priority1] to [Priority5] ([Priority1]: highest priority) as the priority of each signal. When the current
source signal is lost, the display attempts to find a new signal source according to the Signal Check
Priority setting.
• When [Signal Check Priority] is enabled, the display attempts to find a valid signal source according to
the Signal Check Priority setting at power on.
• When the signal source for which [Priority 1] is set is not found, the display checks other sources in
order of priority and switches to the available source with the highest priority.
• When the signal source with the highest priority recovers, the display automatically switches to the
source again.
• When [Signal Check Priority] is disabled, the display uses the last used source at power on.
• When [Signal Check Priority] is enabled and the signal source is USB, the USB data is automatically
played at power on.
CEC Control Select On or Off for CEC Control.
Sleep Timer Change the Sleep Timer setting or set Sleep Timer to Off.
Power Save Change the Power Save setting or set Power Save Mode to Off.
Software Update (USB) Updates software via the USB port.
Reset Default Resets the settings in the Setup menu back to their factory settings.
Initial Setting
OSD Rotation Select [Landscape] or [Portrait] as the orientation of the OSD.
Menu Language Change the language used for OSD Menu.
Time Format Select [12 Hour] or [24 Hour].
Clock Set the time and date.
Remote Operation Enable or disable Remote Operation.
Keypad Operation Enable or disable Keypad Operation.
Anti-Image Retention Select [Picture shift] or [White pixel], or set Anti-Image Retention to Off.