NEC DXE Series User Manual Download Page 45

Page: 45 / 49

Room Monitor

To activate Room Monitor (at the monitored extension) :

Press Off/On-Hook Key.

Dial 770 ( ).

Dial 1.

Dial the monitoring extension number. (Confirmation tone shall be heard.)

Set the transmitter of the handset toward the room.

To activate Room Monitor (at the monitoring extension) :

Press Off/On-Hook Key.

Dial 770 ( ).

Dial 2.

Dial the monitored extension number. (Confirmation tone shall be heard.)

Keep lifting the handset.

Note : The monitored DECT handset has to be set first, then the monitoring DECT

handset has to be set.

To cancel the Room Monitor (at both extension) :

Press Off/On-Hook Key to finish.

Tandem Ring

To set the Tandem Ring :

Press Off/On-Hook Key.

Dial 844 ( ).

Dial 1 to set.

Dial the destination extension number. (Confirmation tone shall be heard.)

Press Off/On-Hook Key to finish.

To cancel the Tandem Ring :

Press Off/On-Hook Key.

Dial 844 ( ).

Dial 0 to cancel. (Confirmation tone shall be heard.)

Press Off/On-Hook Key to finish.

Summary of Contents for DXE Series


















































Search results

Summary of Contents for DXE Series

Reviews:

Related manuals for DXE Series

Brands by name

Popular brands

NEC DXE Series, User Manual

Search results

Summary of Contents for DXE Series

Reviews:

Related manuals for DXE Series

Brands by name

Popular brands