NEC Dterm IP User Manual Download Page 70

Page: 70 / 80

– 66 –

Option 2

Boss presses

Answer

and converses with secretary. Trunk A is placed on hold.

Boss presses station 2001 key and converses with Trunk B. Boss presses

Answer

to reconnect to Trunk A.

Secretary hears reorder tone, hangs up.

Boss can alternate between the two parties by pressing

Answer

Option 3

If boss does not respond to 3 bursts of tone, secretary presses

Recall

Secretary is connected to Trunk B.

Option 4

Boss presses

Answer

and converses with Secretary. Trunk A is placed on hold.

Boss denies call, presses

Transfer

to return to Trunk A.

Secretary is returned to Trunk B.

Note:

If boss has 4/8/16/16LD/32 button display terminal, display always indicates the connected station or trunk at any

given time.

Do Not Disturb

While idle (on hook)

Press

DND

. LED lights.

Note:

With Soft Key operation, “

DND

” flashes when set.

To cancel

Press

DND

. LED goes out.

Using the Soft Key

Press flashing

DND

Soft Key.

Note: DND

must be programmed by the Telephony Server Admin. on a pro-

grammable feature key.

4:26 PM TUE 13 APR 2004

DND SET

4:26 PM TUE 13 APR 2004

DND CANCEL

MIC DND

>>>

4:26 PM TUE 13 APR 2004

Summary of Contents for Dterm IP
















































































Search results

Summary of Contents for Dterm IP

Reviews:

Related manuals for Dterm IP

Brands by name

Popular brands

NEC Dterm IP, User Manual

Search results

Summary of Contents for Dterm IP

Reviews:

Related manuals for Dterm IP

Brands by name

Popular brands