NEC DT820 Series, User Manual

Page: 90 / 234

P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
7 -70
DT820 Phone User Guide
• To enter special characters, press the 1 key.
For a list of special characters, see “Speed Dial and Personal Directory
Character Sets” in your phone’s User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Note:
Fewer than 24 characters may be displayed depending upon the contents of
the this field since a proportional font is used to display the field.
4
Use the telephone keypad to enter a phone number for the entry and press Enter
b
on
the cursor pad or the OK softkey.
Up to 24 characters may be entered for the number. Only digits, “*” and “#” may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Note:
Fewer than 24 characters may be displayed depending upon the contents of
the this field since a proportional font is used to display the field.
5
To use the Programmable Key you originally pressed for the Speed Dial, press Enter
b
on the cursor pad or the OK softkey.
Or
If you want to use a different Programmable Key for the Speed Dial, use the telephone
keypad to enter the other Programmable Key number and press Enter
b
on the cursor
pad or the OK softkey.
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone. For more information on the valid Speed Dial Keys for the
specific phone models, see “Speed Dial Key Numbering” in your phone’s User Guide.
6
Select the monitor settings for this speed dial, then press Enter
b
on the cursor pad or
the OK softkey.
Note:
Monitoring can only be done on other lines that are internal to your system.
You cannot monitor external or outside lines.
Valid options for monitoring are:
•
1 None - Do not monitor presence state changes for this Speed Dial Key
• 2 Visual - Presence state is shown visually using the LED on the Speed Dial Key,
and a Presence icon is shown in the Personal Directory.
• 3 Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key, and a Presence icon is shown in the Personal Directory. When a
call is ringing on the monitored terminal, play a soft ring tone.
Note:
Option
3
Visual and Soft Ring is only valid for SIP@Net platforms. Contact
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.