| NEC Display Wall Calibrator - UsEr’s GUiDE
Preferences dialog
Sensor Type
- Selects the model of calibration sensor to use, and shows the current model being used.
Auto-Detect
- Attempts to detect the selected model of calibration sensor.
NEC Display Wall Calibrator
will
automatically detect the calibration sensor when the application is started, however if the sensor was not
connected at that time, or if it was being used by another application, then it may be necessary to re-detect it.
Note:
If the sensor was not attached when NEC Display Wall Calibrator was launched, then it may be necessary
to exit the NEC Display Wall Calibrator application and launch it again. In some cases it may be necessary to
re-connect the USB sensor for it to be detected.
Model
and
Serial Number
- Shows the model and serial number of the currently selected calibration sensor
device.
The
Preferences
dialog is accessed from the
Edit
menu, and is divided into 3 different tabs.
The default settings for the entire Preferences can be restored by clicking the
Defaults
button.
Preferences dialog - Calibration Sensor tab
