NEC Display Wall Calibrator 1.0.00 User Manual Download

Page: 18 / 57

| NEC Display Wall Calibrator - UsEr’s GUiDE

Single IP LAN with daisy-chained RS232

In this example, the host PC is connected to the first display via LAN. Subsequent displays are connected together

using RS232 daisy-chaining. Each display on a daisy-chain must have a unique MONITOR ID.

The first display is configured to use LAN as the EXTERNAL CONTROL on the OSD. The other displays are

configured to use RS232 as the EXTERNAL CONTROL on the OSD. The RS232 OUT on the first display is

connected to the RS232 IN on the next display.

Since communications to all of the displays is routed through the first display, the software is configured to use the

IP address of the first display for each display. The first display will translate commands via LAN to the RS232 OUT

to be received by the other displays in the video wall.

The following image shows how this layout looks in the Summary window when configured. Notice that all of the

displays are configured in the software to use the LAN IP address 192.168.0.1, even though displays 2, 3, and 4

are connected together via RS232.

LAN

RS232 OUT

RS232 IN

RS232 OUT

RS232 IN

RS232 OUT

RS232 IN

ID 1

LAN

IP 192.168.0.1

Display 1

ID 2

RS232

Display 2

ID 3

RS232

Display 3

ID 4

RS232

Display 4

IP 192.168.0.255

LAN

Summary of Contents for Display Wall Calibrator 1.0.00

























































Search results

Summary of Contents for Display Wall Calibrator 1.0.00

Reviews:

Related manuals for Display Wall Calibrator 1.0.00

Brands by name

Popular brands

NEC Display Wall Calibrator 1.0.00, User Manual

Search results

Summary of Contents for Display Wall Calibrator 1.0.00

Reviews:

Related manuals for Display Wall Calibrator 1.0.00

Brands by name

Popular brands