-
30
-
Auto Pause
An automatic pause can be inserted between sets of digits in a
similar manner as manual pauses. To enter automatic pause
marks, enter in the telephone number; press
M82
. A “,”
(comma) is displayed after the phone number. Enter in the next
set of digits. If necessary, press
M82
to insert another
automatic pause and then enter in the next set of digits. When
the automated system telephone number is dialed, your phone
waits approximately three seconds at each automatic pause
mark and then automatically transmits the remaining sets of dig-
its.
Link to Phone Book
If the total number of digits needed to access an automated tele-
phone system exceeds the maximum 26 digits that can be trans-
mitted at one time (or stored in each phone book location), the
phone number can be entered and then linked to a phone book
location containing the remaining strings of numbers. To link a
phone number to a phone book record location, key in the phone
number and press
M83
; an “
L
” is displayed. Enter the
phone book location (1-99) containing the applicable informa-
tion. Press
S
to dial the phone number. After the phone num-
ber is dialed, the following message is displayed indicating that
the remaining sets of digits must be sent manually be pressing
S
.
Press SND For Manual Pause Dial
9. Mute
The Mute Menu can be accessed by pressing
M9
during a
conversation. The Mute Menu is displayed below.
Mic Mute
The phone microphone can be turned off or muted during a con-
versation. With a call in progress, press
M91
.
Press
M93
to turn on the microphone again.
Menu Shortcut
M82
Menu Shortcut
M83
Menu Shortcut
M9
S e t
m
u t e
1 .M i c
M u t e
2 .A l l
M u t e
3 .U n m u t e
Menu Shortcut
M91