10
TO CANCEL FORWARDING
Lift your handset or press the Speaker key. Press the forward key you wish to remove (Fwd NA,
Fwd All, or Fwd Busy) and hang up. The LED light will go off and your display will indicate
“Forward Cancel.”
Voice
This feature allows you to speak directly through the handset into another person’s speaker. It
is a one-way intercom.
TO MAKE A VOICE CALL
Lift your handset, dial the desired extension, and press the Voice button. Four “pings” will be
heard on the telephone being called. The person you are calling must have the MIC button on
to speak to you without lifting the handset; otherwise, they may use their handset at any time.
S&R (Save and Redial)
This key acts as a one-time-only speed dial. While on a call, you may press the S&R button to
save the number. The LED will light up and your display will indicate “S&R.” The number will
remain saved indefinitely. To redial the number, lift your handset or press the Speaker key.
Listen for dial tone, then press the S&R key. The LED light will go off and your phone will begin
dialing automatically.
Note
: Once you redial, the number is no longer saved. You may save the number again by
repeating the above steps.
Conference
This will allow you to place a 3-way conference call. For more information on conference calls,
see page 6.
Call Back
When a busy signal is received after dialing a campus number, this feature allows your D-Term
phone to notify you and automatically complete the call when the line is free.
TO ACTIVATE CALL BACK
After receiving a busy signal from an extension, press the Call Back key, and hang up. You will
be able to make and receive other calls in the meantime. When the busy extension becomes
free, your phone will ring and the display will indicate “CALL BACK.”
TO CANCEL CALL BACK
To cancel this feature after it has been activated, get a dial tone and press the Call Back key.
Summary of Contents for D-Term IP-32
Page 1: ...D Term IP 32 User Guide ...
