©2018 NEC Display Solutions, Ltd.
Page
29
of
71
cd Desktop
Clone the usbboot tool repository:
git clone --depth=1 https://github.com/raspberrypi/usbboot.git
cd usbboot
4.
Install libusb using the following command:
sudo apt-get install libusb-1.0-0-dev
5.
Now build and install the usbboot tool:
make
sudo make install
Run the usbboot tool and it will wait for a connection:
sudo rpiboot
You should see
Waiting for BCM2835/6/7
6.
Power up the Compute Module in USB boot mode:
a.
Make sure the USB cable is directly connected between the host PC and the display.
Do
not use a USB extender cable or hub between the host PC and the display.
b.
On the NEC display select the
COMPUTE MODULE
video input.
c.
Navigate to the
COMPUTE MODULE
menu on the OSD.
d.
Select
POWER
.
e.
If
POWER SUPPLY
is currently
ON
then change it to
OFF
and confirm.
b
c
e
d