background image

    

 Looking at features   11

Optimized power management

 The NEC C Series monitor uses an optimized power management
system. This is an innovative power-saving feature that complies with
both the EPA’s Energy Star requirements and Europe’s
TCONUTEK’s power management requirements. Energy Star
products use less than 30 watts when in the main power-saving mode.
The NUTEK specification 803299 requires automatic power down to
less than 30 watts in the suspend mode and less than 8 watts in the off
mode.

 When in the maximum power-down mode, the monitor consumes
approximately 10% of the total power drawn under normal operation.
This innovation adds up to 90% energy savings, longer monitor life,
environmental protection, reduced emissions, and reduced air
conditioning costs of the work environment.

Reduced emissions

 The NEC C Series monitor incorporates reduced magnetic field
technology to reduce magnetic and alternating electric field emissions
and static electricity.

 NEC monitors follow the strictest magnetic field, alternating electric
field, and electrostatic recommendations of the Swedish Board for
Technical accreditation.

 SWEDAC (previously known as MPR, National Board for
Measurement and Testing) specifies maximum recommended values
of electric and magnetic fields. The NEC C Series monitor conforms
to SWEDAC’s MPR 1990:8 (MPR II) methods, which is one of the
most restrictive guidelines in the world.

Summary of Contents for C SERIES


















































Reviews: