background image

English-2

Registration Information

Canadian Department of Communications Compliance Statement

DOC: 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

C-UL: 

Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.

FCC Information

1.  

Use the attached specifi ed cables with the AccuSync AS241W (L240U8) color monitor so as not to interfere with radio    

 

and television reception.

 

(1) 

The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,    

 

 

and meet the following condition.

Power supply cord
Length
Plug shape

Non shield type, 3-conductor
1.5 m

U.S.A

 

(2) 

Please use the supplied shielded video signal cable. 

 

 

Use of other cables and adapters may cause interference with radio and television reception.

2.  

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used 
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:

 

• 

Reorient or relocate the receiving antenna.

 

• 

Increase the separation between the equipment and receiver.

 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

 

• 

Consult your dealer or an experienced radio/TV technician for help.

 

 

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. 

The user may fi nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify 
and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce, 
Washington, D.C., 20402, Stock No. 004-000-00345-4.

Summary of Contents for AS241W-BK



















Reviews: