background image

English-12

Specifi cations

Monitor Specifi cations

AccuSync AS241W

Notes

LCD Module 

Diagonal:

 

Viewable Image Size:

 

Native Resolution (Pixel Count): 

59.8 cm/23.55 inches 
59.8 cm/23.55 inches 
1920 x 1080

Active matrix; thin fi lm transistor (TFT) liquid crystal 
display (LCD); 0.2715 mm dot pitch; 300 cd/m

2

 white 

luminance; 1000:1 contrast ratio (typical).

Input Signal

DVI: 

DVI-D 24pin:

Digital RGB

DVI (HDCP)

VGA: 

15pin Mini D-sub:

Analog RGB
Sync

0.7 Vp-p/75 ohm
Separate sync.TTL level Positive/Negative

Display Colors

16,777,216

Depends on display card used.

Synchronization Range  

Horizontal:

  

Vertical:

31.5 kHz to 81.1 kHz
56 Hz to 76 Hz

Automatically
Automatically

Viewing Angle 

Left/Right:

 Up/Down:

±85° (CR > 10)
±80° (CR > 10)

Resolutions Supported (Some systems may 
not support all modes listed).

720 x 400*

1

 VGA text

640 x 480*

1

 at 60 Hz to 75 Hz 

800 x 600*

1

 at 56 Hz to 75 Hz

832 x 624*

1

 at 75 Hz

1024 x 768*

1

 at 60 Hz to 75 Hz

1152 x 870*

1

 at 75 Hz

1280 x 960*

1

 at 60 Hz

1280 x 1024*

1

 at 60 Hz to 75 Hz

1440 x 900*

1

 at 60 Hz

1680 x 1050*

1

 at 60 Hz

1920 x 1080 at 60 Hz........................................... NEC DISPLAY SOLUTIONS cites recommended 
 

  resolution for optimal display performance.

Active Display Area 

Landscape: Horiz.:

 Vert.:

521.3 mm/20.5 inches
293.2 mm/11.5 inches

Power Supply

AC 100-240 V ~ 50/60 Hz

Current Rating

0.45 - 0.25 A

Dimensions  

Landscape:

566.0 mm (W) x 395.1 mm (H) x 190.0 mm (D)
22.3 inches (W) x 15.6 inches (H) x 7.5 inches (D)

Weight

4.3 kg (9.5 lbs)

Environmental Considerations
 Operating 

Temperature:

  

Humidity:

 Altitude:
 Storage 

Temperature:

 Humidity:
 Altitude:

5°C to 35°C/41°F to 95°F
20% to 80%
0 to 6,562 Feet/0 to 2,000 m
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 40,000 Feet/0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and 
necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on the screen is actually one 
pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: 

Technical specifi cations are subject to change without notice.

Summary of Contents for AS241W-BK



















Reviews: