English-8
How to remove the stand
1. Spread the protective sheet on the flat surface, such as a desk.
2. Place monitor on the protective sheet.
3. Remove 2 screws of each stand with a screw driver and keep them for reuse.
Hole of stand
Claw of Monitor
Stand
Screw M5 x 55
Screw M5 x 45
How to install stand
1. Please turn monitor off.
2. Insert claws of monitor to stand holes until clicks.
3. Fasten 2 screws of both side.
Upper M5 x 55 Lower M5 x 45
Torque 280 ~ 300N cm
01_English
15/10/02, 12:07 pm
8
Summary of Contents for AccuSync LCD3000
