background image

English-12

Features

Reduced Footprint:

 Provides the ideal solution for environments with space constraints that still require superior image quality.

The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another.

Color Control Systems:

 Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a 

variety of standards.

OSD (On-Screen Display) Controls:

 Allow you to quickly and easily adjust all elements of your screen image via simple to use 

on-screen menus.

NaViSet software:

 Offers an expanded and intuitive graphical interface, allowing you to more easily adjust OSD display settings 

via mouse and keyboard.

No Touch Auto Adjust:

 No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup.

ErgoDesign Features: 

Enhance human ergonomics to improve the working environment, protect the health of the user and 

save money. Examples include OSD controls for quick and easy image adjustments, tilt base for preferred angle of vision, small 
footprint and compliance with MPRII and TCO guidelines for lower emissions.

Plug and Play:

 The Microsoft

®

 solution with the Windows

®

 operating system facilitates setup and installation by allowing 

the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically 
optimizing display performance.

Intelligent Power Manager System:

 Provides innovative power-saving methods that allow the monitor to shift to a lower power 

consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the 
air conditioning costs of the workplace.

Multiple Frequency Technology:

 Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the 

resolution required.

FullScan Capability:

 Allows you to use the entire screen area in most resolutions, significantly expanding image size.

VESA Standard Mounting Interface:

 Allows users to connect your AccuSync monitor to any VESA standard third party 

mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device.

Environmental Impact: 

Annual typical maximum operating carbon footprint of this monitor (world-wide average) is 

approximately 16.3 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-Carbon 
conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition). 
This monitor has a manufacturing carbon footprint of approximately 19.9 kg.

NOTE:

 

The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for 
its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values.

HDCP(High-bandwidth Digital Content Protection):

 HDCP is a system for preventing illegal copying of video data sent over 

a Digital Visual Interface (DVI).If you are unable to view material via the DVI input, this does not necessarily mean the display is 
not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP 
and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).

Summary of Contents for AccuSync AS193i


















Reviews: