background image

This section describes how to set up your MultiSync MT1020/MT820 LCD
projector and how to connect video and audio sources.

Setting Up Your MultiSync MT1020/MT820
LCD Projector

Your MultiSync MT1020/MT820 LCD Projector is simple to set up and use.
But before you get started, you must first:

1. Determine the image size

2. Set up a screen or select a non-glossy white wall onto which you can project

your image.

Carrying The LCD Projector Always carry your LCD projector by the

handle. Ensure that the power cord and any other cables connecting to video
sources are disconnected before moving the projector. When moving the
projector or when it is not in use, cover the lens with the lens cap.

I N S T A L L A T I O N

2

Carrying handle

Pull out

Selecting A Location  The further your LCD projector is from the screen or

wall, the larger the image. The minimum size the image can be is approxi-
mately 20" (0.5 m) measured diagonally when the projector is roughly 3 feet
(1.0 m) from the wall or screen. The largest the image can be is 300" (7.6 m)
when the projector is about 40.03 feet (12.2 m) from the wall or screen.

350

300

250

200

150

100

50

0

0.0

6.56

13.12

19.69

26.25

32.81

40.03

ft.

(2.0)

(4.0)

(6.0)

(8.0)

(10.0)

(12.2) (m)

Projection Distance

Diagonal Image Size (inch)

Projection Distance and Image Size

300”

235”

WIDE

TELE

27”
20”

INSTALLATION

29

30

Width

Height

Screen size

(diagonal)

Projection distance

Push to release the
handle.

Push to retract

Summary of Contents for 8201020













































Reviews: