NEC 80044 System Manual Download

Page: 61 / 272

Call Routing Mailbox

IntraMail System Guide

Chapter 2: Features

◆

✔

By default, Call Routing Mailboxes are 000-007.

1.3

8006 - IntraMail Routing Mailboxes:

Mailbox Active

on page 227.

- Enter

(9) to make the mailbox active.

✔

By default, all Routing Mailboxes are active.

Step 2

To record an Instruction Menu for the Call Routing Mailbox:

2.1

See

Operation

below.

✔

The default Instruction Menu is:

If you are calling from a touch tone phone . . .

Step 3

To assign which Dial Action Table will provide dialing options for this Call routing Mailbox:

3.1

8006 - IntraMail Routing Mailboxes:

Dial Action Table

on page 228.

- Enter the Dial Action Table (e.g., 1) that will provide the dialing options.

✔

By default, all Call Routing Mailboxes use Dial Action Table 1.

Step 4

To change the amount of time Automated Attendant callers have to dial options:

4.1

Automated Attendant

on page 42 for more.

4.2

8006 - IntraMail Routing Mailboxes:

Time Limit for Dialing Commands

on page 228.

- Enter the new timeout duration (0-99 seconds).

✔

By default, Automated Attendant callers have 5 seconds to dial commands.

4.3

If the caller waits too long to dial:
- When the associated Dial Action Table has a Timeout action programmed, the caller routes

to that destination.

- When the associated Dial Action Table does not have a Timeout action programmed, the

Instruction Menu repeats 3 times and then IntraMail hangs up.

Step 5

To set the Maximum Length of Instruction Menus:

5.1

8004 - IntraMail System Options: Non-Subscriber Message Length

on page 213.

5.2

- This sets the maximum message length (

1-4095

seconds) for Instruction Menus.

✔

The default setting is

120

seconds.

Summary of Contents for 80044

















































































































































































































































































Search results

Summary of Contents for 80044

Reviews:

Related manuals for 80044

Brands by name

Popular brands

NEC 80044, System Manual

Search results

Summary of Contents for 80044

Reviews:

Related manuals for 80044

Brands by name

Popular brands