78K0/Lx3 - See it!
User’s Manual
U18759EE2V0UM00
55
(b) Advance
setup
The Advance setup menu is used to specify the command options and security flag
settings.
When "Advance" is clicked, the following window is displayed:
Figure 49: Device Setup Window - Advance
<1> Command options
This dialog box is used to specify the WriteEZ3 flash processing command options.
Figure 50: Device Setup Window - Command options
[Blank check before Erase check box]
If this check box is checked, blank check is made before the Erase command or EPV
command is executed.
If the result of a blank check indicates OK, erase processing is not executed.
[Read verify after Program check box]
If this check box is checked, write data is sent from the programmer after execution
of the Program command and EPV command, then the data is verified against the
data written to the flash memory.
[Security flag after Program check box]
If this check box is checked, automatic programming of the selected security flag is
executed after execution of the [Program] and [Autoprocedure (EPV)] commands.
