English−11
Before you begin
The camera can be mounted to either the left or right speaker. Initially, the speaker cover with the camera
window is on the left speaker. If you want the camera located on the right side of the monitor, swap the speaker
covers between the left and right speakers.
The speaker cover is attached with pins that automatically release when the cover is leveraged away from the
speaker body. You will need a flathead screw driver to remove the speaker cover.
OOTE:
The camera and speaker covers can be moved after mounting the speakers to the monitor.
First, if the speaker is not mounted to the
monitor, lay the speaker flat with the cover
facing up.
1.
Insert the tip of the flat-head screwdriver
between the speaker cover and speaker.
(See Figure 1 for approximate location of the
pins)
2.
Carefully lift the cover slightly. Stop when
you hear the "click" that indicates a pin has
released from the speaker.
Use care when leveraging the cover away
from the speaker as the speaker cover will
break if it is lifted too high while pins are still
locked to the speaker.
3. Noing around the edge of the speaker, repeat
steps 1 and 2 where each pin is located.
4. After removing both speaker covers, swap
the speaker covers so that the camera
window is on the right speaker. Carefully
press down the speaker cover to lock the
pins in place.
