background image

English

English-24

USING THE TIMER

Turn the “ADVANCED OSD” to “ON” in the MAIN MENU 
to access the TIMER feature in OPTION3.

To user the TIMER feature the fi rst set the internal clock and 
the day of the week. Th

  e display can also be programmed to 

turn on or off  at preset times, and which input the display 
will use at those times. Th

  e Program Timer which turns on 

or off  the power at the day of the week, time and the input 
mode you want, or Repeat Timer which displays two input 
modes alternately can each be set also. In the “OPTION3” 
OSD menu, select “TIMER”, then press the SET button. Th

 e 

“TIMER” screen appears.

PRESENT TIME

Th

  is sets the day of the week and present time. Example: 

Setting “WEDNESDAY”, “22:05” In the “TIMER” menu, 
select “PRESENT TIME”, then press the  SET button.

Th

  e “PRESENT TIME” screen appears. Set the items.

 

Turn DAYLIGHT SAVING TIME on if daylight  

 

savings is observed.

 

Select the day of the week.

 

Set the clock using the 24-hour (HH/MM) format.

To accept PRESENT TIME settings, highlight “SET”* in the 
PRESENT TIME OSD menu, then press the  SET button to 
store the settings. 

* If you press the EXIT button instead of the SET button, 
Timer settings will not be accepted.

PROGRAM TIMER

Th

  e PROGRAM TIMER feature allows a series of scheduled 

operation times to be set. Th

  e display can be programmed to 

run on a particular day and time while using a desired input 
source. Under the Function setting (FUNC.) either a Screen 
Saver setting (ORBITER, INVERSE, WHITE) or a REPEAT 
TIMER program can be set for the monitor to use during the 
scheduled power-on time. 
NOTE: When a REPEAT TIMER program is selected as 
the Function setting, the Program Timer's Input option 
is not available. Th

  e input used will use the input that is 

programmed for the Repeat Timer program. 
Up to 10 individual PROGRAM TIMER schedules can be 
set. When schedules are set to perform functions at the same 
time, the schedule with the lower number has priority. For 
example schedule #1 has priority over schedule #10. When 
schedules overlap, each action is sequentially executed.

Using special characters in the PROGRAM TIMER 
setting.

Using an asterisk (*) alone in the DAY fi eld means that the 
programmed schedule will run every day.

Using the asterisk (*) and the name of the day means the 
programmed schedule will run only on that day. For example 
"*FRI" means that the schedule will run every Friday.

A hyphen (-) in either the ON or OFF fi elds means that a 
time is not set. In order to use the Program Timer, at least 
either an ON or OFF time has to be set. 

A hyphen (-) in the INPUT or that the monitor will use the 
previously used display mode for that particular schedule.

If a Repeat Timer sequence is selected in the FUNC. fi eld, 
the Input fi eld will show a hyphen (-).

Setting the PROGRAM TIMER using multiple inputs

Set the INPUT fi eld to “MULTI”, then press the SET button. 
Th

  e “MULTI SCREEN SETTING” will appear on the screen.

Use the 

p

 and 

q

 buttons to select “MULTI MODE”, then 

use the + and - buttons to choose from “S BY S1, 2R, or 
2L” and “PICTURE IN PICTURE MODE (BOTTOM 
LEFT~TOP LEFT)”.

Use the 

p

 and 

q

 buttons to select “MAIN”/“SUB” and 

“LEFT”/“RIGHT”, then use the + and - buttons to choose 
from “VIDEO1 to "DVI”. 

To set “REP.1~3” as the FUNC.

Set the FUNC. fi eld to “REP.1”, “REP.2” or “REP.3”, then press 
the SET button. Th

  e “REPEAT TIMER” menu will appear on 

the screen.

Use the - and + buttons to choose from “SINGLE”, “S BY S 1, 
2R or 2L” and “PICTURE IN PICTURE MODE (BTM LFT 
to TOP LFT)”, then adjust the items.

Operation

 - continued

Summary of Contents for 60XP10 - PlasmaSync - 60" Plasma Panel













































Reviews: