Using Your NEC Versa 4-11
Using Audio CDs in Windows for Workgroups
Follow these instructions to play audio CDs in Windows for
Workgroups. The first time you play an audio CD, you
need to add the device to the Media Player’s Device option
list. Follow these steps to do so. You only need to perform
this procedure the first time. After that, go directly to
“Playing Audio CDs.”
Adding the CD Audio Option
Add the CD Audio option to the Media Player’s Device list
as follows:
1.
Insert the audio CD into the CD-ROM reader tray.
2.
From the Program Manager, open the Main program
group and double click the Control Panel icon.
3.
Double click the Drivers icon and select “Add.”
4.
Scroll through the list of drivers and highlight
[MCI] CD
Audio
and click “OK.”
A message similar to the following appears:
One CDROM drive was detected. Installation is complete.
If you see a prompt stating that the mcicda.drv is al-
ready on the system, select “New.”
5.
Press “OK” and close the Control Panel.
6.
Go to the next section, “Playing Audio CDs.”
Playing Audio CDs
Play audio CDs in Windows for Workgroups as follows:
1.
If you have not yet done so, insert a CD into the tray.
2.
From Windows, double click on the Accessories pro-
gram group.
Summary of Contents for 2600
Page 11: ...viii Setting Up Your Computer ...
