Nebula WASH-500ZOOM, User Manual

Page: 15 / 20

13C
Fixture Maintenance
Select Fixture Maintenance , press ENTER button to confirm, use UP and DOWN
button to select Interval or Remain Time .
Interval
Select Interval, press ENTER button to confirm, the interval time will show on the
display. Press MENU button to exit.
Remain Time
Select
Remain Time,
press ENTER button to confirm, the remaining time will show on
the display, press ENTER button to confirm, use UP and DOWN button to select
Exit
or
Reset time , press MENU button to exit.
Factory Setting
Select Factory Setting , press ENTER button to confirm, the fixture will reset to factory
settings and exit menu mode.
3.3 Home Position Adjust
In the main functions, hold Enter button for at least 3 seconds into offset mode, use DOWN
and UP button up to chose Pan Offset , Tilt Offset or Zoom Offset, pressing ENTER
button and the display will blink. Use DOWN and UP button to adjust the home position of
the Pan, Tilt or Zoom, Once the position has been selected, press the ENTER button to
setup, to go back to the functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one minute to exit the menu
mode.