NEBTIME UN 600A, User Manual

Page: 11 / 32

11
Fill the liquid jar up to the end of the bars on the upper lid (sterile water is
advisable) close the lid firmly and fix it on the device.
lock on its place by turning the jar in the clockwise.
Place the bacterial filter on the air outlet of the device.
Place one tip of the short hose to the outlet of the bacterial filter and the
other tip to the outlet of the jar.
If the heater is intended to be used heater will be mounted on the other outlet of
the jar. Also, place the long steam hose on the outlet of the heater.
If the heater is not intended to be used directly place the long hose to the outlet
of the jar.
Fix the socket of the heater cable to the male socket of the device located on
the back side (if you experience difficulty while fixing turn the socket to the
right and left side enable its location on place). Squeeze the bolt on the socket
to the across side. Fit the long hose on the cuffs over the stand.
Arrange position of the stand by loosening the butterfly screws on the joint
components and squeeze again.