Neato Robotics Neato XV Series User Manual Download Page 44

Page: 44 / 116

LCD Feedback Messages

Neato XV™ Series User Guide

LCD Feedback Messages

Your vacuum is smart and will let you know when it needs help with anything. Just read

the messages on the LCD to understand what it needs. Here are some specific tips.

LCD Message

Remedy

Dirt Bin Full

Empty dirt bin and replace into its slot.

Brush Stuck

Remove brush guard and clean all hair and
debris from brush and brush shaft. Replace
brush and guard and press START button
to resume cleaning.

Bumper Stuck

Jiggle the bumper to loosen.

Time Not Set

If your battery runs very low, the Neato
Vacuum loses its clock setting. Use the
menus to reset the time and day as
described in

Setting the Clock

on page 28.

Summary of Contents for Neato XV Series




















































































































Search results

Summary of Contents for Neato XV Series

Reviews:

Related manuals for Neato XV Series

Brands by name

Popular brands

Neato Robotics Neato XV Series, User Manual

Search results

Summary of Contents for Neato XV Series

Reviews:

Related manuals for Neato XV Series

Brands by name

Popular brands