Neatech Rehab Series, Service Manual, Page: 16 / 85

www.neatech.it
6/71
Programming the wheelchair - Drive parameters
Figure 1
•
Start the application PG DRIVES TECHNOLOGIES >> R NET PROGRAMMER >> OEM
GENERIC >>PROGRAMMER
•
Click CONTINUE to actually start the application.
Figure 2
•
Click FILE>>OPEN and select the desired programming file or read parameters from the
wheelchair by clicking on the DOWN arrow.
•
Connect the Rnet Dongle to the PC and to the wheelchair. For more information,
see Rnet manual.
•
Customize desired parameters.
•
When finished turn on the wheelchair and click on the UP arrow to write the
parameters in the wheelchair.