Neatech EVO3, User Manual

Page: 70 / 136

www.neatech.it
59/122
WARNING
In order to calculate the risk for the legrest to crash into the floor the
software assumes that the wheelchair is on a perfectly flat surface far from
any step or obstacle. For these reasons it is very important to not use the
legrest function on a non-flat surface or near steps or obstacles.
AXIS 5 REHAB
Figure 51
Figure 52
Figure 53
MOVE UP
The wheelchair will go in lay-down position and then in
the position shown in Figure 52
An authorized service center is able to adjust the angles
shown in figure. When the movement stops you will
hear a sound.
MOVE DOWN
it is possible to bring back the wheelchair to the default
position shown in Figure 53.