11
SMILE User manual NE41 14002-02 v2.0
7.1.2 Communication
Read from and write to device
When a unit is read from, the firmware is automatically recognized
by the programmer.
The general procedure for obtaining the configuration is:
• Start the reading process in SMILE-ID Programmer.
• Press the alarm button to connect the SMILE-ID with the programmer.
• Pressing the alarm button a second time to read actual configura-
tion.
Read from unit
Click
Communication
->
Read configuration from device
(or press the
keyboard shortcut combination CRTL+R) in SMILE Programmer.
A pop up window appears where the alarm button on the requested
unit should be pressed.
After this, press the alarm button again time to read the configura-
tion. The pop up windows closes and the read is confirmed with a
status message in the lower left corner.
The configuration data is now displayed in the programmer window
and changes can now be made.
Writing to the unit is done in a corresponding way.