18
E. Drainage hose to sewer system
F. Basket
Dear Customers, please check the above written auxiliary equipment to be given with the
machine on delivery. If you notice any damage or loss occurred during the transportation then
you should request the transporter to issue any written report including the relevant damage
or loss.
1.7
DESCRIPTION OF DEVICE WITH EXPLANATIONS
Washing machine has been manufactured regarding the hygienic standards.
The frame (inside/outside), including chassis, panel and boiler, has been wholly manufactured
from stainless steel material.
The legs are in adjustable feature and manufactured from stainless steel material.
Washing tank is automatically filled and continuous level controlled.
Washing and rinsing water temperatures are automatically controlled via two thermostats
working independently.
Its performance and efficiency are higher than those of its competitors.
Program duration is 2 min.
Pumps have been manufactured as detergent and hot water resistant.
Motors have a heat resistant feature and are protected by cooling of fan against higher
temperatures.
The insulation of boiler has been provided by glass wool that is a special insulation material.
Thus, heat losses can be reduced to minimum level and prevented the wasting of energy as
well. System has been fully secured by means of thermal and electrical protectors. Access to
electrical panel, executing of maintenance works and inspections have been quite facilitated.
Full automatically washing has been performed at 55 ºC. Rinsing is performed at 80 to 85 ºC by
hot and fresh water. Electrical equipment and cables comply with European Standards and
safety regulations.
1.8
REPLACING THE DEVICE AND PREPARING FOR START UP
1.8.1
INSTALLATION BEFORE ASSEMBLING
A-WATER İNLET
B-WATER OUTLET
C-POWER CABLE
INSTALLATION AND USER MANUAL
DISHWASHIN DUSTRIO
