Aydınlı Mah. Tuzla Mermerciler Org. San. Bölgesi Mermerciler Cad. No:41 Tuzla / İSTANBUL
T: 0216 593 02 42 F:0216 593 02 43
www.ndustrio.com
3.4. Cleaning
Regularly clean the outside of your device. Do not use any abrasive chemicals (lime remover,
sprit of salt, etc) during the cleaning operation. You can perform surface cleaning with warm
water with soap.
Before starting cleaning, make sure to disconnect the electrical supply.
You can clean the outer coating and drum of your machine by wiping with soft materials (cloths,
sponge, etc.) so as not to damage the machine.
Do not wash your device with hoses or any similar tools. This may result in damage to the
electrical installation of your device. In such a case, a safety weakness may occur and also
your device will be excluded from the warranty scope in case of a possible failure.
Absolutely do not enter in the machine drum.
WARNING: after completing the cleaning of your machine, check the cleaning products;
make sure that there is no cleaning materials left in the machine!
4. GENERAL SPARE PARTS
NO
PART NAME
1
CONTROL PANEL
2
ELECTRICAL MOTOR (2 pieces)
3
MOTOR BELT
4
EMERGENCY STOP BUTTON
5
RESISTANCE
6
FILTER
7
V BELT
8
DRUM STRETCHER
5. BEFORE CALLING THE SERVICE
Failure
Probable Reason
What should be done
Heating
Resistance failure
Resistance fuse blown
Call service
Have it checked by your
electrician
Failure
Probable Reason
What should be done
Late Drying One or more blown
resistance
Call service
Cover
failure
Cover switch
Cover is not completely
closed
Call service
Completely close the loading
cover