Aydınlı Mah. Tuzla Mermerciler Org. San. Bölgesi Mermerciler Cad. No:41 Tuzla / İSTANBUL
T: 0216 593 02 42 F:0216 593 02 43
www.ndustrio.com
1.2.2 Air Discharge Connection
Connect the air discharge on the rear side of your device with a pipe suitable for operational
installation.
This pipe can be flat metal or a flexible pipe. If you don’t make such connection,
the air produced by the device at a high temperature and humidity may threaten the
environmental conditions in terms of occupational health and safety.
All connection and repair works have to be performed by “Authorized Services”. Otherwise,
your device may be out of warranty scope.
Air Discharge
1.3 . PLACEMENT OF THE DEVICE
Make sure that the ground on which your device will be placed is flat. After placement, check
whether your device is balanced by using a water gauge. If your device is not balanced, adjust
the feet of your device by turning them to the right/left. After completing the placement of your
device, if it is not in balance, especially during the mangling operation, over-vibration may
occur, and noise may be produced due to such vibration. Such vibrations may also damage
your device and may result in unpredicted damages on the mechanical accessories of your
device.
You can fix the device on the floor on its feet. However, this is generally unnecessary.
Leave a working space on the side and rear parts of the device for easy service, maintenance
and repair.