NDT Supply.com
7952 Nieman Road
Lenexa, KS 66214 USA
Phone: 913-685-0675
Fax: 913-685-1125
www.ndtsupply.com
Step
Action
1
Select your cleaning solution (refer for solution effects on metals)
2
Allowing for the volume of the parts you will be cleaning and operation level line
(one inch from the top)
3
Add cleaning solution to the tank of water
4
Plug the cleaner into a ground outlet
NOTE:
If this is the first time you are running the cleaner, or if you have changed cleaning solution,
you must degas the solution. If not, skip to “
Cleaning Items
”.
Degassing
Step
Action
1
Turn the HEAT ON (Unless its 0.7 Liter)
2
Turn the TIMER to 5-10 and let the cleaner run to allow the solution to
“degas”.
Cleaning Items
NOTE:
To stop ultrasonics at any time, press red off button.
Step
Action
1
Set the TIMER for the amount of time you wish the items to be cleaned.
2
Place the items into a basket.
3
Slowly lower the basket into the tank. Do not allow items to contact the tank
bottom.
4
When items are clean and time is up, slowly remove them from the cleaner.
5
Rinse the clean items with clean water and dry them, if necessary.
Operating Your Cleaner
