List-Magnetik GmbH
EN FERRITE-CHECK 110 2022-11.doc
6
0
-
B
ASE
C
ALIBRATION
The base calibration is called zero calibration, although its result is not FN 0, but FN
140. FN 140 corresponds to 100% Fe and is the value of full iron or saturated ferrite
material.
In the off-hook state, select in the menu
0 - Base Calibration
, then place the
instrument with the measuring probe on the FN140 calibration standard. Now wait
until the FN140 value is displayed and confirmed by a signal tone, and then lift the
instrument again.
