2
2
1.1 Specifications
Display
Super Twist LCD, 3.9" 240x320, transflective; backlit, contrast
adjustable, battery status and mode icons, large
thickness/soundpath display. Hollow or filled waveform, reversed
field selectable.
Display Mode
RF; Positive Halfwave, Negative Halfwave, Full-wave rectified.
Graticule
Graphically Generated, 10 x 10 major divisions
Receiver
0.5 to 25 MHZ Broadband, 1 Band Pass Filter
Gain
100 dB; 0.1, dB selectable steps
Pulser
Broad Band Spike
Damping
8 values from 25 to 375 Ohms.
Linear Reject
Linear to 90% maximum.
Delay
0 to 20 inches (3807mm) FS (steel equivalent).
Velocity
0.0500 to 0.9999 inch per microsecond
Zero Adjust
0 to 20,000 nanoseconds
Synchronization
IP (Initial Pulse), IF (Interface), Delay
Transducer Modes
Single or dual-element.
Display Modes
RF; positive, negative, full-wave rectified.
Flaw Mode
Two (2) gates selectable; positive or negative threshold. Visible and
audible alarms triggered at pulse repetition rate. Gate start variable
over entire displayed range. Gate width variable from gate start to
maximum displayed range. Gate level adjustable from 1% to 99%
full screen.
Thickness Mode
Single echo or echo to echo thickness measurement. Independently
adjustable IP, IF and echo blocking gates. High and low alarms,
Large number readout low/high resolution selectable, last reading
hold.
Resolution
0.0001 or 0.001 inch (0.01mm).
Stored Setups
30 user defined setups.
Input/Output
RS232; transfer setups to and from PC. Full instrument control by
PC.
Units
Inches or millimeters
