NDS ZEROWIRE G2, User Manual

Page: 11 / 40

11 / 40
General Information | 11
3 General Information
3.1 About This Manual
This manual is designed to assist the user with installation, setup and operation of the ZEROWIRE® G2 wire-
less video system.
The functional descriptions in this manual are representative of:
1. ZEROWIRE® G2 Receiver
2. ZEROWIRE® G2 Transmitter (input: DVI and 3G-SDI)
See ZEROWIRE® G2 Accessory Kits by Display [
}
32] for product part numbers and accessories .
3.2 Intended Use and Contraindications
Intended Use
The NDS ZEROWIRE® G2 is a paired wireless video communication transmitter and receiver, intended for de-
livery of video signals from a source such as an endoscopy camera/processor, or other video source over a ra-
dio-frequency link to a
ZEROWIRE® G2 Receiver for display of images during endoscopic and general surgical
procedures.
The ZEROWIRE® G2 wireless video system is a non-sterile reusable device not intended for use in the sterile
field.
Contraindications
1. These units are non-sterile reusable devices and are not intended for use within a sterile field.
2. This equipment may not be used in the presence of flammable anesthetics mixture with air, oxygen or ni-
trous oxide.
Do not use in MR Environments
WARNING!
No part of this product may come in contact with a patient. Never touch the product and a
patient at the same time. At any time, a minimum separation of 20 cm must be maintained
from the operating device and the user or patient.
WARNING!
For mission critical applications, we strongly recommend that a replacement ZEROWIRE® G2
transmitter and receiver pair, and a DVI cable, be immediately available.
Additionally, we recommend that a display that is hard wired to the video source be imme-
diately available whenever a surgical procedure is in progress.
See Typical Installation [ } 21].