NDS SMARTCHARGER SCS2, User Manual

Page: 4 / 20

1. Introduction
Easy to use, Automatic, Professional battery charger
with advanced microcontroller and the whole New
OPTICHARGE firmware algorithm.
SMART CHARGER is perfect for daily battery charging
and every technology, and maintenance in every
application, including: Cars, Motorcycles, Nautical,
Campers, Work vehicles, etc…
SAFETY INSTRUCTIONS
• Child Safety: Keep the device Out of Reach.
• Carefully check the integrity of the device and
connectors.
• To avoid overheating and possible fires do not install
the device in a sealed environment, Always choose a
well ventilated area.
• Do not place the device on highly flammable
surfaces or environments (eg: paper, cloth, etc.).
• Do not cover the cooling slits on the side and the fan
on the top.
• Do not install the device near wet batteries: they
produce flammable, corrosive and explosive gas
while working, and it can damage the product.
• Protect the device from sunlight or direct sources of
heat.
• To avoid malfunctions, DO NOT install and use the
device in very humid environments, in contact with
water splashes, various liquids, or exposed to rain.
• To avoid risk of electric shock and/or fire, the
vehicle's fuel system must be in good condition.
• In case of damaged connecting cables or
inadequate section, immediately replace them with
suitable cables as specified by this manual or by a
qualified electrician.
• In case of anomalies in the conformity of the
product do not use it! it is strictly forbidden to open
the device. Repairs may only be carried out by
2