8 | GX2MP Display
Connect the Video Cable and Power Cord
Turn your computer off. Leave the power cord plugged into
the grounded outlet. Use the video cable and cord shipped with
the display.
To connect the display and board
1 Plug one end of the DVI cable into the video port and the power
cord into the input port on the interface plate. (See the illustration
below.) Secure the connections.
2 Plug the other end of the video cable into the video port on
the installed display controller. Secure the connection.
3 Plug the power cord into a grounded AC outlet.
4 Repeat steps 1 to 3 to connect a second display to the controller.
5 Power on the display first, then the computer.
Installation Tips
• Access to ports. For displays mounted on a desk stand, rotate the
LCD panel from landscape to portrait for access to the ports.
• Cable management. Thread the video cable and power cord
through the stand column. Make sure the cable and cord run
through the notches. To reattach the stand cover, align the hooks
with the slots on the stand. Press the cover into place. A click
sound signals a secure connection.
