NDS DTB01, User Manual

Page: 7 / 28

6. INSTALLAZIONE
1. Remove the DBT01 mounting frame
2. Place the mounting frame on the wall chosen for
installation and take marks for:
• holes for the fixing screws (diameter 3mm);
• hole for the communication cable pass through
(minimum diameter 7.2mm).
3. Drill the holes and screw mounting frame to the
wall, using the screws provided, be sure that they do
not protrude once screwed in.
4. Pass the communication cable (white connector)
through the hole previously made and insert it
gently onto the display board.
5
CAUTION
Do not force the connector into the housing: the right direction is
unique!
a. Slide the display
cover plate
upwards in
relation to the
rear mounting
frame
b. Lift up the lower
part of the display
cover plate
c. Slide the display
cover plate
downwards, in
relation to the
mounting frame,
and release it