manualshive.com logo in svg

NDS 90T0007, User Manual, Page: 30 / 66

Share
Download
NDS 90T0007 User Manual Download Page 30

23 

Color Menus 

Gamma (Graphic modes only)

1

 

Press 

fi

 or 

fl

 to select a preset 

Gamma

 value, 

Video

 or 

PACS

3

 

Notes: 

1. 

Video

 is a color corrected Look Up Table (LUT) available with DVI,  VGA and SOG. 

2. 

PACS

 is a DICOM-like* LUT available with DVI, VGA and SOG.  

3. 

Video

 is not available when the input is SOG. 

4. 

Gamma

 is preset to 

Video

 for video modes and may not be changed. 

 

Color Temperature (Graphic modes only)

1

 

Press the 

fi

 or 

fl

 button to select one of the four preset color temperatures or User. Selecting User allows 

the individual adjustment of the Red, Green and Blue values. 
 

Red, Green, Blue (Video or Graphic modes)  

Touch the 

fi

 or 

fl

 button to increase or decrease the intensity of the selected color. 

 

Saturation (Video modes only)

2 

 

Touch 

fi

 or 

fl

 to set the saturation (color intensity) of the image.  

 

Hue (Video modes only)

2

 

Touch 

fi

 or 

fl

 to set the hue (color tint) of the image.  

 

Notes:  

1.  1024 x 768, 1280 x 1024 and 1920 x 1200 are some of the graphic modes. 
2.  A list of Video modes is shown on page 58. 
3.  This product is capable of passing Radiology (PACS) images to a compatible display. These PACS 

images are for reference only and may not be used for diagnostic purposes. 

Graphics Color Menu 

Video Color Menu 

Summary of Contents for 90T0007



































































Reviews:

No comments