NDE Pool MASTER PLUS NDE-08-DCP, User And Service Manual

Page: 18 / 34

- 18 -
6.4 Key Operating Instruction
6.41
“ ”: ON /OFF button.
Short press
“ ” to exit and return to the main interface.
In the main interface, long press and hold the “ ” key for 3 seconds to turn on / off.
6.42
“ ”
：
Mode button.
In the power on state, long press
“ ” for 3 seconds to switch the working mode: heating
mode and cooling mode.
6.43
“ ”: Add button.
When its turn on, in
the main interface, press “ ” to adjust the setting temperature of
current mode;
6.44
“ ”: Reduce button.
When its turn on,
in the main interface, press “ ” to adjust the setting temperature of
current mode
6.45 Parameters Query.
In the main interface, long
press and hold the “ ” button for 3 seconds to enter the heat
pump status parameter query, Type “ ” , “ ” buttons for reading different parameters, and
press the “ ” button to exit the parameter query.
Heat pump status Parameter table
Inquiry Code Description Display Range
A01 Inlet water temp -30~99
℃
A02 Outlet water temp -30~99
℃
A03 Ambient temp -30~99
℃
A04 Discharge temp 0~125
℃
A05 Suction temp -30~99
℃
A06 Outer coil temp -30~99
℃
A07 Inner coil temp -30~99
℃
A08 Main EV opening 0-480
A09 Assistant EV opening 0-480
A10 Compressor current
A11 Radiator temp
A12 DC bus voltage
A13 Compressor actual rotate speed
A14 DC fan motor actual rotate speed