Bottom bracket sensors for E-Bikes
NCTE
Page
12
of
12
Cleaning
The sensor can be wiped with a dry cloth. In case of heavy soiling, the sensor can alternatively be wiped damp
with a solution of lukewarm water with a little dishwashing detergent.
Cleaning with a high-pressure cleaner can damage the ball bearings.
Contact or cleaning of the sensor with liquids containing solvents is not permitted
EC conformity
The product meets the requirements of the European Union and has a corresponding CE certificate. For
further information, please contact our customer support: [email protected]
1.
The threads of the adapter shells and the frame must be clean before
mounting. Possible dirt and burrs must be removed before mounting. The
threads must not be greased. The left adapter shell is tightened with a
bottom bracket tool with a torque of 30 Nm. For a bottom bracket width
of 73 mm, it must be ensured that the spacer ring is located in the adapter
shell.
2.
The sensor cable is fed through the bottom bracket into the frame. When
inserting the sensor, the cable must not be kinked or pinched. The sensor
is secured against rotation by inserting it into the left adapter shell. The
right adapter shell is then also tightened with the bottom bracket tool to
a torque of 30 Nm.
NCTE AG
Raiffeisenallee 3
D-82041 Oberhaching
Germany
Internet
www.ncte.de
Phone:
+49 89 665619-0
E-Mail:
Montage
