_______________________________________________________________________________________
_______________________________________________________________________________________
Page 18 of 20
13
Order options
Series 7000 Accuracy 0,5 %
Measuring range [Nm]
3000
including 5m cable and calibration certificate
5000
including 5m cable and calibration certificate
customer Customer-specific up to 5,000 Nm including 5 m cable and calibration certificate
Shaft end first side
0
NCTE flange (bolt circle 138 mm with 8 x M12)
X
Customer-specific
Shaft end second side
0 NCTE flange (bolt circle 138 mm with 8 x M12)
X Customer-specific
Angle / speed sensor
0
Without angle sensor
1
Angle sensor 360CPR (only with IP50)
2
Speed sensor 1CPR
3
Speed sensor 60CPR
Output signal analogue
A
voltage output 0-10 V
S
Current output 4-20 mA
Digital output signal (optional)
U
USB incl. NCTE software and 2.8 m cable
C
CAN bus (not with angle sensor)
Inverted output signals (optional)
I
All output signals inverted
Protection class to EN 60529
0
IP 50
1
IP 65
7000
5000
0
0
1
S
C
0
1
Example sensor configuration
We would be pleased to provide you with further information about serial products in a personal contact
under
Phone: +49 (0)89 66 56 19 30 or by e-mail:
